General Hydro-Force Boats FAQs

Is there any other way to mount a motor to Bestway boats other than using a motor mount kit?

No the motor mount kit is made specifically for Bestway boats

Can the boat be dragged on the ground?

No, dragging it on the ground may cause punctures in the lining of the boat and will result in deflation or a leak.

How can I find a hole in my boat?

Holes can be found by using a spray bottle and a soapy solution. Spray all over the boat and watch the bubbles that will form. Please first check the surface around the screw valve and welding seam carefully. If the valve is leaking, you can deflate the boat and screw the valve tightly.

How can I repair a small holes?

Small holes can be repaired very quickly by using either the repair kit you received with your boat or by using Air Seal (U051/AS1). Both only take a few minutes to dry completely.

Where can I purchase Air Seal (U051/AS1)?

This can be purchased online by searching for this product.

What type of cleaning products can I use to clean my boat?

We would suggest using a diluted solution of washing up liquid as this is non-abrasive and will not damage your boat.

What can I use to dry my boat?

Any house-hold cloths or towels can be used.

How should I store my boat when it is not in use?

The boats are easily stored away, please ensure this is thoroughly clean and dry before storing away.  We would suggest you roll up the deflated boat and store this in a canvas bag.

What size motor is my boat compatible with?

Please see the product features as this will provide you with this information.

What is the boxed size and weight?

Box Size – 60 (L) x 31 (W) x100cm (H) – Weight – 47.4KG (104.5lb)