Lay-Z-Spa Bali AirJet – BW54183

  • Specifications
  • Troubleshooting
  • General Maintenance
  • Warranty


Item No: BW54183
Capacity 2 - 4 Adults
Water Capacity   (80%) 669 L (177 Gal)
Inflated Size   (external) 1.80m x 66cm (71" x 26'')
Internal size   (inflated)
Filled Weight 696kg (1534lb)
Cable Length 7m approx
Voltage 220-240~50Hz, 2050W at   20°C, Class II
Actual Water Flow 1,325L/h (350 Gal/h)
Max Heat Capability 40°C (104°F)
Certification CE/EMC/TUV approved
Box Weight 30.9 kg (68.0 lb)


  • Comfortably Fits 2-4 People
  • 81 AirJets™ Massage System
  • 40°C Rapid Heating System
  • Outer walls of the inflatable pool are made of TriTech™ material
  • Remote-control activated multi-coloured LED light strip system
  • Energy Saving Timer
  • Portable. Durable. Insulated
  • Easy 5 Minute Setup
  • For indoor or outdoor use
  • Digitally controlled pump for massage system water filtration and heating

What's Included

  • Digitally Controlled Heater Spa Pump with Integrated Water Filtration & AirJet System
  • 1 x pool liner
  • 1 x pool cover
  • Filter cartridges
  • 1 x chemical floater
  • 1 x LED light strips
  • Air pad protector
  • Repair patch


Standard Warranty Periods:

All of our spas come with a standard warranty period, so that you have the peace of mind that in the unlikely event that you were to experience an issue we are here to help you.
Standard Warranty - Pumps 12 months from date of purchase
Standard Warranty - Liners and Lids 6 months from date of purchase
Standard Warranty - Cover 6 months from date of purchase

Extended Warranty Periods:

We are currently offering Free Extended Warranties on purchase of new spas if registered within 28 days from purchase. Please click here to activate your extended warranty.
Extended Warranty - Pumps 18 months from date of purchase
Extended Warranty - Liners and Lids 12 months from date of purchase
Extended Warranty - Covers 12 months from date of purchase

General Maintenance

If you are unable to find what you are looking for please Contact Us.
Filters Filters should be cleaned after every use using water to remove any small particles of debris. If the filters are used for too long they will change colour and deteriorate, meaning the health of the water is not being maintained effectively. Dirty filters can also cause E02 errors to appear on the pump. If you are unable clean the filters these should be replaced.
Water It is important that you maintain the health of your water using chemicals. If chemicals are not used in the water this can lead to a bacteria build up that can cause skin problems and deteriorate the spa. For more information on chemicals please visit our chemicals page.
Cleaning the spa In order to clean the spa, (covers and inflatables) a solution of diluted washing up liquid should be used. If you have a problem with stains, then a stain remover can be purchased from
Cleaning the pump unit To clean the spa pump through please see our backwash procedure which can be located in the Troubleshooting section of the website.
How to fix a puncture It is important that the inflatable part you are repairing is completely dry before the repair patches are used. It is vital to ensure this is left to fully bond with the item before this is re-inflated.